Chocolate Artist Software/Printer

Replies to This Discussion

Permalink Reply by Jose Romero on February 27, 2013 at 6:42pm

Thanks!  I will make my first try immediately I receive my sheets from UK  :), on the other hand here I use CIS already in two printers, for regular ink, and there is no brand since those are from China, but for sure  price is the best way to choose. You have some that cost like $30 and some of $60, I will go for the costly one.   Here is a link with an example:   http://articulo.mercadolibre.com.co/MCO-403674573-impresora-multifu...        Actually, I already talked with some people using CIS (no brand) for photoprinting and not problem at all.  ;)

• ▶ Reply

Permalink Reply by Jim Braunagel on March 12, 2013 at 9:38pm

I've read quite a bit on this site, but not seen info that would explain how to print the logos found here: http://www.chocolatceleste.com/

Do you know how she has printed a logo with white that only partially cover the surface on dark chocolate? 

• ▶ Reply

Permalink Reply by Glenn Knowles on March 12, 2013 at 9:57pm

Jim,

My guess is that it's produced by an outside vendor such as Sweet Swiss in Spokane, WA. They've made similar transfer sheets for me with white logos...and the staff there are great to work with. If you find out something different, please let me know as I'd be curious to know how, too!

Glenn

• ▶ Reply

Permalink Reply by Eric Normand on March 13, 2013 at 5:00am

I think the logo was printed with the silk screen process with colored cocoa butter.   

• ▶ Reply

Permalink Reply by Debra Fleck on March 13, 2013 at 11:08am

There are several companies that can do the customized logos. Chef Rubber, PCB from France, and several other companies.

• ▶ Reply

Permalink Reply by Jose Romero on March 29, 2013 at 8:48pm

Hi Debra, I already have my canon 4920 and CIS system,  chocosheets from HCF. But my first tries were bad. Do you directly use the TS02 on the printer? or stick it on a regular A4. An also do you select  normal paper or any other option like transfer or photopaper.   Thank you  for any direction. On my case between theory and practice there is a big gap :) 

• ▶ Reply

Permalink Reply by Debra Fleck on March 29, 2013 at 10:17pm

TS02 directly on the printer. Attached are the settings that I use. If the images are sticking to the sheet (partially) then there is too much ink flow. The settings on the attachment are for any canon printer.If the ink is flowing to much then change the brightness to LIGHT.

• ▶ Reply

Permalink Reply by Akua Obenewaa Donkor on April 25, 2013 at 3:12pm

Please can anyone help me where i can buy only the software in the United States? I already have an edible printer

• ▶ Reply

Permalink Reply by Debra Fleck on April 25, 2013 at 4:42pm

I think that tomric might have the software. If not then Chocolat-chocolat in Montreal will have it. Purchasing anywhere within North America is fairly easy and straight forward. It's just as easy to order directly from Deco artist in England. Maybe even faster for shipping.

• ▶ Reply

• ‹ Previous
• 1
• …
• 4
• 5
• 6
• Next ›
• Page