The Chocolate Life

Discover Chocolate and Live La Vida Cocoa!


I have a used ICGC-C-40 wet grinder that now leaks from the stainless bowl to granite bottom seal.  Any recommendations on a sealant/glue to reseal the bowl?  I tried GE Silicone II from the outside but it did not seal well.  I think I am going to have to seal the bowl from the inside - which is a food contact surface.


Paul Picton

Views: 157

Replies to This Discussion

Hi Paul, I've had similar issues with CocoaTown's 65-A (8lb) grinder. I used a food grade epoxy to glue the plastic piece at the center of the bottom of the drum to the stone drum with great success. Here's a link to the product available at McMaster:

Hope that helps.

Thank-you.  I will give it a try.



Member Marketplace

Promote TheChocolateLife

Bookmark and Share

Follow Clay on:
Twitter :: @DiscoverChoc
F'Book :: TheChocolateLife
F'Book Group :: LaVidaCocoa :: @DiscoverChoc

© 2014   Created by Clay Gordon.

Badges  |  Report an Issue  |  Terms of Service