The Chocolate Life

Discover Chocolate and Live La Vida Cocoa!

Hello.

I have a used ICGC-C-40 wet grinder that now leaks from the stainless bowl to granite bottom seal.  Any recommendations on a sealant/glue to reseal the bowl?  I tried GE Silicone II from the outside but it did not seal well.  I think I am going to have to seal the bowl from the inside - which is a food contact surface.

Thank-you,

Paul Picton

Views: 125

Replies to This Discussion

Hi Paul, I've had similar issues with CocoaTown's 65-A (8lb) grinder. I used a food grade epoxy to glue the plastic piece at the center of the bottom of the drum to the stone drum with great success. Here's a link to the product available at McMaster:

http://www.mcmaster.com/#66525a21/=pzqwgl

Hope that helps.
Adam

Thank-you.  I will give it a try.

Paul

RSS

Member Marketplace

Promote TheChocolateLife

Bookmark and Share

Follow Clay on:
Twitter :: @DiscoverChoc
F'Book :: TheChocolateLife
F'Book Group :: LaVidaCocoa
Paper.li :: @DiscoverChoc

Badge

Loading…

© 2014   Created by Clay Gordon.

Badges  |  Report an Issue  |  Terms of Service